WET DRY CHEMICAL CYLINDER DEMCO’s Wet Chemical Cylinder (Kitchenzon) is ideal for commercial kitchens that are designed extinguish fires using an environmentally friendly wet chemical extinguishing agent. The agent is ideal for fighting Class A, B and F fires, and does not damage or contaminate kitchen equipment. Available in a wide range of cylinders, DEMCO’s Wet Chemical System is the cost efficient solution designed to provide total coverage of your kitchen equipment through an overlapping discharge pattern by the nozzles.

HIGH HEAT TEMPERATURE DETECTOR (MODEL D-143) The Demco Detector is a heat sensitive electrical switch. It is a fixed temperature device with a factory pre-set temperature 232°C. The D-143 Detector comprises of normally open electrical contacts mounted within a stainless steel probe. A rise in temperature will cause the contacts to close at the set point temperature. With the drop in temperature the procedure reverses and the contacts re-open below set point temperature. The detector body is a precision machine from AISI304 Stainless Steel with high corrosion resistance. The operation parts are factor calibrated and sealed against severe environmental condition, further adjustment or calibration is not required.

SELENIOD VALVE Material : Brass nickel-plated Voltage : 24V DC Power Consumption : 12 Watt Pressure Gauge Connection : M10X1 Valve Outlet : G1/4”

NOZZLES  The Demco’s nozzle that is required in the Wet Chemical System is Appliance Nozzle, Plenum Nozzle and Duct Nozzle. Spray Cone Diameter @ 1000m Height : 1100 mm for 40 degree ; 500mm for 15 degree Spray Form : Full Cone